China Online Exporter Beauty Cotton Soft Towel - Custom Rubber & Plastic Injection Molding – Mingda factory and suppliers

Online Exporter Beauty Cotton Soft Towel - Custom Rubber & Plastic Injection Molding – Mingda

Short Description:

Product Detail

FAQ

Product Tags

Feedback (2)

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Pump Parts, conical gear, Straight Pipe Thread Fittings, Standing still today and searching into the long run, we sincerely welcome shoppers all around the globe to cooperate with us.

Online Exporter Beauty Cotton Soft Towel - Custom Rubber & Plastic Injection Molding – Mingda Detail:

Basic Info

Casting Method: Special Casting

Surface Roughness: Ra3.2

Machining Tolerance: +/-0.01mm

Standard: ASME

Certification: SGS, ISO 9001:2008

Size: As Per Drawing

Additional Info

Packaging: standard export package

Productivity: 100 Ton/Month

Brand: Mingda

Transportation: Ocean,Land,Air

Place of Origin: China

Certificate: ISO9001

Port: Tianjin

Product Description

Injection molding is a manufacturing process accomplished by forcing raw, uncured rubber into a heated mold using a reciprocating screw. The material is formed and cured under heat and pressure, then removed to cool as a custom shape.

Compression molding uses a pre-measured amount of raw rubber material that is placed into a heated open lower mold cavity. The top cavity is then forced closed, causing the raw material to flow through the shape of the mold.

In transfer molding, rubber is measured, heated and forced into chamber. A plunger is used to force the material into the mold using a system of runners and channels to thoroughly fill the closed mold. The mold is heated to cure the raw material.

Molded Parts:

Rubber Gaskets
Rubber Door & Window Seals
Rubber Grommets
Rubber Bellows / Dust Covers
Vibration Dampening
Bump Stops / Screw Mounts

Materials:

Neoprene (CR)
Ethylene-Propylene (EPDM)
Nitrile (NBR)
Silicone (SI)
Styrene-Butadiene (SBR)
Natural Rubber (NR)

plastic

Custom Injection Molding8

plastic parts

Product detail pictures:

Related Product Guide:

We pursue the administration tenet of Quality is exceptional, Provider is supreme, Name is first, and will sincerely create and share success with all clientele for Online Exporter Beauty Cotton Soft Towel - Custom Rubber & Plastic Injection Molding – Mingda , The product will supply to all over the world, such as: Irish, Zimbabwe, Palestine, Our items have national accreditation requirements for qualified, high quality goods, affordable value, was welcomed by people today all over the world. Our products will continue to enhance within the order and look forward to cooperation with you, Should really any of these products and solutions be of curiosity to you, be sure to letus know. We are likely to be content to offer you a quotation up on receipt of your detailed needs.

Microfiber Terry

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.

By Nicole from Amman - 2018.12.11 11:26

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!

By Helen from Indonesia - 2017.02.14 13:19

Write your message here and send it to us